| Type |
PSC30/x/24-y-CAN |
PSC30/x/48-y-CAN |
PSC30/x/60-y-CAN |
PSC30/x/110-y-CAN |
PSC30/x/220-y-CAN |
PSC30/x/220-y Relay |
| Код заказа x=110 |
200-030-740.00 |
200-030-750.00 |
200-030-760.00 |
200-030-770.00 |
200-030-780.00 |
--- |
| Код заказа x=220 |
200-030-840.00 |
200-030-850.00 |
200-030-860.00 |
200-030-870.00 |
200-030-880.00 |
200-030-880.01 |
| Nominal input voltage |
110VDC +30/-20% ; 220VDC +15/-20%; according to the article codes |
| Nominal input current @110VDC/220VDC |
18.3/10.1ADC |
19.6/12.2ADC |
19.6/12.2ADC |
19.6/12.4ADC |
19.6/12.3ADC |
---/12.3ADC |
| Efficiency |
≥87% |
≥91% |
≥91% |
≥91% |
≥91% |
≥91% |
| Internal input fusing @110VDC/220VDC |
40A gL/25A gL |
| Nominal output voltage |
24VDC |
48VDC |
60VDC |
110VDC |
220VDC |
220VDC |
| Nominal output current @110VDC/220VDC |
Y=70/80ADC |
Y=40/50ADC |
Y=32/40ADC |
Y=17.5/22.3ADC |
Y=8.9/11.1ADC |
Y= --/11.1ADC |
| Adjustable range @110VDC/220VDC |
40-70/40-80A |
25-40/25-50A |
20-32/20-40A |
11-17.5/11-22.3A |
5.5-8.9/5.5-11.1A |
---/5.5-11.1A |
| Charging characteristic line |
IV-line acc. to DIN 41772/DIN 41773 |
| Output voltage V01 (factory set) |
24VDC ±1%(23.4 to 28.8V adjustable) |
48VDC±1%(46.6 to 57.6V adjustable) |
60VDC ±1%(58.5 to 72V adjustable) |
110VDC ±1%(105 to 130V adjustable) |
220VDC ±1%(211 to 260V adjustable) |
220VDC ±1%(211 to 260V adjustable) |
| Output voltage V02 (boost charging) |
28.8VDC ±1%(24 to 30V adjustable) |
57.6VDC±1%(48 to 60V adjustable) |
72.0VDC ±1%(60 to 73V adjustable) |
129.6VDC ±1%(110 to 135V adjustable) |
259.2VDC ±1%(216 to 270V adjustable) |
259.2VDC ±1%(216 to 270 V adjustable) |
| Output voltage V03 (Battery test) |
22.2VDC ±1%(20.4 to 24V adjustable) |
44.4VDC±1%(40.8 to 48V adjustable) |
55.5VDC ±1%(51 to 60V adjustable) |
99.9VDC±1%(91.8 to 110V adjustable) |
200VDC ±1%(184 to 216V adjustable) |
200VDC ±1%(184 to 216V adjustable) |
| Voltage ripple |
≤ 20mVpp |
|
|
|
|
| Psophometric acc. to CCITT-A |
≤ 1.0mVrms |
≤ 1.2mVrms |
≤ 1.8mVrms |
- - - |
- - - |
- - - |
| Dynamic accuracy of the charging voltage |
< 3% Vnom at load transients between 10% - 90% - 10% Inom, recovery time t ≤ 1.0ms |
| Short circuit protection |
Continuous short circuit proof, 1x Inom |
| Parallel operation |
Yes, <10 pieces, load sharing appr. 10% Inom |
| Internal decoupling at the output |
optional |
| LED signalling |
Input O.K. (green); V01 (green); V02 (green); I0 (yellow); V< (green); V> (red); Alarm (red) |
| Digital displays |
Output voltage, output current |
| Isolated signalling contacts |
“General fault” and “V0<“ |
| Monitoring |
Output voltage high/low, output voltage, output current, short circuit |
| External functions |
Active current sharing, boost charge and battery test function, temperature compensation of the charging voltage, external sensor lead for the output voltage, remote ON/OFF, optocoupler signal “V0 O.K.“, “Mains O.K.” and “Constant current operation” |
| Communications interface |
CAN-Bus interface for communication with central monitoring unit (MU1000C, optional) - - - |
| Ambient temperature |
Operation: -20°C to +45°C, storage: -40°C to +85°C |
| Climatic conditions |
IEC 721-3-3 class 3K3/3Z1/3B1/3C2/3S2/3M2 |
| Max. installation altitude |
<1500m |
| Audible noise |
< 40dB (A) in 1m distance |
| Construction |
1/3 x19“ module, 6U for mounting in sub racks acc. to DIN 41 494, front connectors |
| Dimensions (W/H/D) |
142/262/405mm |
| Weight approx. |
12.4kg |
| Cooling |
Fan cooling |
| Type of enclosure / Protection class |
IP20 (mech.) / 1 (electr.) |
| Surfaces |
Front panel: powder coating RAL 7035, black imprint; constructive parts: anodized |
| CE conformity |
Yes |
| Compliance to safety standards |
EN 60950-1, VDE 0100 part 410, VDE 0110, EN 50178, EN 60146 |
| Compliance to EMC standards |
EN 55011, EN 55022 class „B“, EN 61000– 4 part 2– 5 |
